MOSE

MOSE (MOdular Smart Electrolyzer) is a PEM (Proton Exchange Membrane) electrolyzer available with 7 and 14 kW power. The MOSE 7 produces up to 124 g/h of H2 at 30 bar. The product is equipped with a dryer consisting of two adsorption columns to purify the H2 up to 5.0 quality (99.999% pure). The system is compact (80x80x200 cm) and is designed to be easy deployable

Modularity

Up to 5 MOSE units can be connected together to create a single electrolyser up to 35 kW (0.62 kg/h) or 70 kW (1.24 kg/h) with a single H2 delivery line (and a single vent line)

Control and HMI

MOSE can be controlled from its remote control interface in different modes (basic/extended HMI) or integrated into high-level control (PEMS mode) with MODBUS communication

Flexible regeneration modes

Once a dryer column is saturated, it is regenerated – the process takes a few hours during which MOSE must remain in operation. To optimize the ease of use of the MOSE, the user can select different regeneration modes (CUSTOM/NEXT START/INSTANT). Find out more on the DRYBER page

Performances

Through the MOSE HMI remote control interface, it is possible to monitor its performance such as: absorbed power, hydrogen production, pressure, operating temperature, electrolyte temperature, etc. You can also see the real-time health (SOH) and aging status of your stack by evaluating its performance on the current/voltage graph

Data acquisition & predictive maintenance

BluEnergy Revolution offers the possibility, in agreement with the user, to acquire and visualize MOSE data to monitor its performance in real time and perform predictive maintenance activities to maximize the health and performance of the system, minimizing maintenance costs

Main components

1 - Demi water storage tank (e.g. received from BLUDEMI)
2 - Gas-liquid separator for the removal of O2 from the electrolyte
3 - Electrolysis PEM stack (technological core of the system)
4 - H2 pre-treatment (cooling, liquid separation, O2 removal)
5 - Dryer for drying H2
6 - Delivery H2
7 - Quick coupling for connection to an H2 analysis station (optional)
8 - Cooling system (based on exchange with environment)
9 - System ventilation (dual purpose: safety and heat exchange)

Easy integration and control

MOSE is easy to integrate and control:

connect N°2 H2 lines (delivery and vent)
connect N°2 H2O lines (inlet and outlet)
connect power socket and network/MODBUS cables

You’re ready! The controls accessible on the front door are few and intuitive. It only takes a few minutes to go from installation to production H2.All system control can also be performed remotely

Safety

MOSE is an extremely safe electrolyzer thanks to the forced ventilation of the cabinet that downgrades the area inside it to negligible/ZONE 2 and an H2 detection sensor that disconnects it (and interrupts H2 production) when H2 is detected. The system is equipped with numerous self-monitoring systems (hardware/software) that allow it to automatically secure itself at the first deviation from normal operation

BLUDEMI

BluEnergy Revolution offers a reverse osmosis-based demineralization system designed specifically for coupling with MOSE systems. A BLUDEMI unit produces up to 60 l/h of water with a conductivity of less than 20 uS/cm and can feed up to 5 MOSE units on its own. Connected to MOSE, BLUDEMI is controlled directly in slave mode

CITIGAS
customer of our first 2 MOSE
and partner of BER